In Uncategorized

We are leading manufacturer of 400 series group of Stainless Steel that has 11 percent chromium and 1-percent manganese increase, above the 300 series group. The 400 series is vulnerable to corrosion and oxidization under some conditions. The feature such as heat-treating will harden the 400 series of stainless steels having the higher carbon content, giving it a martensitic crystalline structure and this provided high strength and high wear resistance. Martensitic stainless steels aren’t as corrosion resistant as the austenitic types.

These stainless steels normally restrain chromium and manganese and are magnetic. Although they still reveal the corrosion resistance that is typical of stainless steel in general, they are less corrosion-resistant than the 300 series, and thus typically cost less. These products are well-known for providing good surface finishes.

Applications of Series 400 Stainless Steel

  • Petrochemical,
  • Automotive exhaust systems,
  • Heat exchanges,
  • Furnaces,
  • Appliances and
  • Food equipment
 Series 400 Stainless Steel

410 Stainless Steel Rods

Empowered with rich industrial expertise in manufacturing 410 Stainless Steel Rods which general-purpose martensitic stainless steels are containing 11.5% chromium, which provide good corrosion resistance properties. Further the corrosion resistance of grade 410 steel can be improved by a series of processes such as hardening, tempering and polishing. The properties like Quenching and tempering can harden grade 410 steels.

Our provided grades are manufactured using techniques that require final heat treatment. The provided grades are less resistant to corrosion when compared to that of austentic grades. The operating temperatures of these grades are often affected by their loss of strength at high temperatures, due to over-tempering and loss of ductility at sub-zero temperatures. They are generally used for applications concerning mild corrosion, heat resistance and high strength.

Applications of 410 Stainless Steel Rods

410 Stainless Steel Rods
  • Cutlery
  • Steam and gas turbine blades
  • Kitchen utensils
  • Bolts, nuts, screws
  • Pump and valve parts and shafts
  • Mine ladder rugs
  • Dental and surgical instruments
  • Nozzles
  • Hardened steel balls and seats for oil well pumps
Specifications ASTM, ASME
Dimensions A 276, SA 276
Range Range - 3.17mm to 350mm dia
Grade 410 Stainless Steel Rods

420 Stainless Steel Rods

We are well-known manufacturer and supplier of this domain; we are offering a wide array of 420 Stainless Steel Rods. Our offered 420 is a hardenable, martensitic stainless steel that is a modification of 410. Similar to 410, it contains a minimum of 12% chromium, which provides good corrosion resistance properties. Further the corrosion resistance of grade 420 steel can be improved by a series of processes such as hardening, tempering and polishing. The properties like Quenching and tempering can harden grade 420 steels.

Our provided grades are manufactured using techniques that require final heat treatment. The provided grades are less resistant to corrosion when compared to that of austentic grades. The operating temperatures of these grades are often affected by their loss of strength at high temperatures, due to over-tempering and loss of ductility at sub-zero temperatures. They are generally used for applications concerning mild corrosion, heat resistance and high strength.

Applications of 420 Stainless Steel Rods

309S-309H Stainless Steel Rods
  • Cuttery
  • Knife blades
  • Surgical instruments
  • Needle valves
  • Shear blades
  • Scissrs
  • Hand tls
Specifications ASTM, ASME
Dimensions A 276, SA 276
Range Range - 3.17mm to 350mm dia
Grade 420 Stainless Steel Rods

430 Stainless Steel Rods

Our provided Grade 430 Stainless Steel Rod is ferritic, straight chromium, non-hardenable grade, combining well corrosion resistance and formability characteristics with useful mechanical properties. The offered grade has the ability to resist nitric acid attack which permits its use in specific chemical applications but automotive trim and appliance components represents its largest fields of application. Our clients can avail this Grade 430 in bar form which can be used in automatic screw machines.

Applications of 430 Stainless Steel Rods

430 Stainless Steel Rods
  • Linings for dish washers
  • Refrigerator cabinet panels
  • Automotive trim
  • Lashing Wire
  • Element Supports
  • Stove trim rings
  • Fasteners
  • Chimney Liners

 

Specifications ASTM, ASME
Dimensions A 276, SA 276
Range Range - 3.17mm to 350mm dia
Grade 430 Stainless Steel Rods

431 Stainless Steel Rods

We are fabricating the Grade 431 stainless steel which is martensitic, heat-treatable grades with outstanding corrosion resistance, toque strength, high toughness and tensile properties. The provided grades 431 stainless steel rods properties make them ideal for bolt and shaft applications. These offered steels, however cannot be cold-worked due to their high yield strength, hence they are suitable for operations such as spinning, deep drawing, bending or cold heading. The corrosion resistance properties of grade 431 steels are lower than that of austenitic grades. The operations of grade 431 are limited by their loss of strength at high temperatures, due to over-tempering and loss of ductility at negative temperatures.

Applications of 431 Stainless Steel Rods

431 Stainless Steel Rods
  • Aerospace Industry
  • Nuclear Power Plant Industry
  • Chemical Industry
  • Oil & Gas Industry
  • Refineries Industry
  • Petrochemical Industry
  • Paper Industry
  • Fertilizers Industry
Specifications ASTM, ASME
Dimensions A 276, SA 276
Range Range - 3.17mm to 350mm dia
Grade 431 Stainless Steel Rods

440A-B-C Stainless Steel Rods

We are considered as one of the best stockholder and supplier, of 440 A-B-C stainless steel rods. Our provided 440 A-B-C grade provides good wear resistance combined with moderate corrosion resistance in mild environments and has excellent harden ability. All the three grades 440 A-B-C are having slightly higher carbon content. The offered grade stainless steel to achieve best corrosion resistance, surfaces must be free of scale, lubricants, foreign particles and coatings applied for drawing and heading. Having high carbon content 440C annealed stainless machines are similar to a high speed steel annealed grade. Our developing program was developed to facilitate us to respond flexibly and proficiently to all your product and service requirements. We make an extensive assortment austenitic, ferritic, duplex, and martensitic stainless steel rod with miscellaneous sizes and shapes, including round, square, and hexagonal.

Applications of 440A-B-C Stainless Steel Rods

317L Stainless Steel Rods
  • Rolling element bearings
  • Valve seats
  • High quality knife blades
  • Surgical instruments
  • Chisels
  • Refineries Industry
  • Petrochemical Industry
  • Paper Industry
  • Fertilizers Industry
Specifications ASTM, ASME
Dimensions A 276, SA 276
Range Range - 3.17mm to 350mm dia
Grade 440A-B-C Stainless Steel Rods

446 Stainless Steel Rods

Shrenik Steel Corporation is one of India’s most important manufacturers of high quality 446 Stainless Steel Rods which find application transversely assorted sectors. These 446 Stainless Steel Rods can also be manufactured and machined to meet up the piping requirements of our clients. Also known as UNS S44600, these Rods are having wide-ranging function grade that is regularly supplied in the toughened but still machine able form for functions where eminent strength and restrained heat and corrosion resistance are being desired. Moderately referred as WNR 1.4762, our 446 Stainless Steel Rods are being worn for diverse applications such as in Cutlery, Steam and gas turbine blades, Kitchen utensils, Bolts, nuts, screws, and more. Our presented Rods are available in diverse sizes and shapes that are being designed as per the national and international standard quality of raw materials. Our Stainless Steel 446 Welded Rods can also be offered in customized length sizes and shapes to our well-regarded clients.

Applications of 446 Stainless Steel Rods

 446 Stainless Steel Rods
  • Rolling element bearings
  • Valve seats
  • High quality knife blades
  • Surgical instruments
  • Chisels
Specifications ASTM, ASME
Dimensions A 276, SA 276
Range Range - 3.17mm to 350mm dia
Grade 446 Stainless Steel Rods
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search